Easy Install video guide.

Enjoy our easy installation guide for the Novaware Magnetic Knife Holder.

For step-by-step instructions, please see below.

Tools needed

  • Drill with 5/32” standard drill bit

  • 3/16” ceramic drill bit (if needed)

  • Phillips head screwdriver

  • Screws x2 (included)

  • Wall anchors x2 (included)

  • Spirit level (included)

  • Spray bottle

  • Hammer

  • Stud finder

  • Pencil

Screws & wall anchors included

Screws & wall anchors included

Instructions

Step 1.
Locating stud beam

Use a stud finder to locate wooden beams and lightly mark on wall with pencil for reference

Step 2.
Set desired position

Set desired position of knife holder and ensure it is level. Lightly mark drill points on wall in line with screw holes.

Step 3.
Drilling the holes

Drill 2 holes through the wall using the appropriate drill bits. (see tools needed)

Step 4.
Inserting wall anchors

Wipe tiles from water and insert included wall plugs where necessary.

Step 5.
Screwing the screws

Use a Phillips head screwdriver to screw in screws. Ensure you leave a lip to mount the unit.

Step 6.
Hanging your knife holder

Gently hang your Novaware Magnetic Knife Holder and ensure it is mounted firmly.

Enjoy!

Novaware TIP - Drilling into tiles

Use a spray bottle and continuously spray water mist while drilling to keep the tile drill bit cool.